Research/Education/MSFT/MSFT Perpetual Trading Hours: Reduce-Only Windows Explained

MSFT Perpetual Trading Hours: Reduce-Only Windows Explained

BloFin Academy11/03/2026

Crypto markets never close, so anyone who holds coins gets used to acting at any hour, on a Sunday morning or in the middle of a public holiday. Stock exchanges keep a timetable instead, with an opening bell, a closing bell and a calendar of days when nothing trades at all.

Those two timetables clash when a contract that follows a share price is listed on a venue that never shuts. You can watch the contract's price tick at midnight, yet the company behind it still reports after the closing bell, and its shares still stop trading when the exchange goes home.

Venues that list stock perpetuals tend to settle the clash by splitting the week in two. While the stock's own market is open, trading works as normal. For the rest of the week, the venue may take only orders that make a position smaller, a setting called reduce-only, and anything that adds risk may have to wait until the next session.

On BloFin, the contract for Microsoft (MSFT) is called the MSFTUSDT Perpetual, which uses USDT for margin and tracks the price of Microsoft shares on Nasdaq. When you can open a position on it, and when it may switch to reduce-only orders, is set by one rulebook that covers every stock future BloFin lists, Microsoft included.


What is a reduce-only window on the MSFT perpetual?

A reduce-only window on the MSFT perpetual is any stretch of the week in which BloFin may limit MSFTUSDT to orders that make a position smaller or end it. It covers weekday hours before 9.30AM ET and after 4PM ET, all of Saturday and Sunday, and US market holidays, about four hours in every five.

BloFin sets this out in its stock futures notice, which covers every stock contract on the venue. Away from the weekday session, and over weekends and market holidays, BloFin says trading in those contracts may be held to reduce-only orders (source: BloFin stock futures notice). The Microsoft listing notice words it more firmly, saying that new orders are confined to closing positions outside the primary market's regular hours (source: BloFin MSFTUSDT listing notice). The same listing notice gives the contract's trading hours as 24/7: the price keeps quoting, and it is new exposure that may be held back. Plan as if new Microsoft exposure can only be added while Nasdaq's main session is running.

In practice, the window limits what you can begin and leaves you free to cut what you already have. Suppose you are long MSFTUSDT on a Saturday afternoon. You can sell the whole position or a slice of it, and the rest stays open, gaining or losing as the price moves. Buying more, or turning short, may have to wait for Monday, since both add exposure.

The price does not stop for the window either, because the contract keeps quoting through nights and weekends. How far it can drift before the next session, and what that does to stops, is covered in the guide to overnight and weekend gaps. The contract's own terms, such as its 0.01 MSFT size and its leverage limits, are in the guide to the MSFT perpetual.

BloFin repeats the warning in a banner above the live price and the funding countdown on the MSFTUSDT Perpetual's trading screen.


MSFT perpetual trading hours in ET and UTC

The MSFT perpetual's regular hours, when opening trades work normally, follow Nasdaq's main session, 9.30AM to 4PM ET, Monday to Friday. Written in UTC, the same session spans 1.30PM to 8PM while US daylight saving time lasts and 2.30PM to 9PM in standard time, which in 2026 starts with the Monday, November 2 session.

Nasdaq gives its market hours as 9.30AM to 4PM ET all year (source: Nasdaq holiday schedule). BloFin writes the same session in UTC, with an open at 1.30PM and a close at 8PM in US summer time, and an open at 2.30PM and a close at 9PM in standard time (source: BloFin stock futures notice). In ET nothing moves; only the UTC labels shift.

A weekday session lasts six and a half hours, which makes 32.5 hours over the five days. Out of the week's 168 hours, that leaves 135.5 hours, or 80.7%, inside the window. The split stays the same in winter, since the time change moves the session without making it any shorter.

For a crypto trader that is a sharp change of pace. Bitcoin, the USDT in your futures account and any coin positions you hold all trade every hour of the week. A Microsoft position can be cut at any of those hours too, but adding to it is assured only in roughly a fifth of them.

The November daylight saving change

America goes back to standard time on the first Sunday of November, with clocks turning back at 2AM local time, and in 2026 that Sunday is November 1 (source: NIST daylight saving time rules). From the next trading day, Monday, November 2, each UTC time for the session is one hour later, while the ET times hold still.

BloFin's notice uses the same switch dates, with standard time lasting until the second Sunday in March (source: BloFin stock futures notice). If you are outside the US, work from the UTC times, because your own clocks may shift on another date, or never. Say your country keeps one time all year and you like to place trades at 2PM UTC. On Friday, October 30, your usual time is 10AM ET, half an hour after the bell. On Monday, November 2, the same moment is 9AM ET, half an hour early, and an order to open a position would land in the window.

The weekend that straddles the switch also runs an hour longer. In 2026 it runs from the 8PM UTC close on Friday, October 30 to the 2.30PM UTC open on Monday, November 2, a gap of 66.5 hours. A usual summer weekend, from Friday's 8PM UTC close to Monday's 1.30PM UTC open, lasts 65.5 hours.

Funding settlements and the trading day

Funding on the MSFT perpetual normally changes hands at 12AM UTC, 8AM UTC and 4PM UTC, eight hours apart. On a normal weekday, only the 4PM UTC payment lands while Nasdaq's main session is open: at 12PM ET in US daylight saving time and 11AM ET in standard time. The other two always fall inside the reduce-only window.

BloFin's contract page gives the funding interval as every eight hours (source: BloFin MSFTUSDT contract details). Its schedule is not tied to US daylight saving time, so the UTC times stay put all year. In ET, the 12AM UTC payment comes at 8PM in daylight saving time and 7PM in standard time, and the 8AM UTC payment at 4AM and 3AM.

This matters if you would rather sit out a payment than pay it. You can close before the 12AM or 8AM UTC settlement at any time, since a close shrinks the position. Getting back in is another matter, because reopening might only be possible at the next session, many hours and possibly a big price move later. The 4PM UTC payment is the only one with open-session time on either side of it. The cost of funding and what decides its sign are explained in the guide to MSFT perpetual funding.


MSFT perpetual holidays and early closes in 2026

The MSFT perpetual's 2026 holiday list ends with four dates, all taken from Nasdaq's calendar. Nasdaq shuts all day for Thanksgiving, November 26, and for Christmas, December 25. On November 27 and on December 24 it closes early, at 1PM ET, which moves the start of the reduce-only window on those days to 6PM UTC.

Nasdaq's 2026 schedule carries those four dates as the year's last closures and early closes (source: Nasdaq holiday schedule). BloFin's notice has its own table for 2026, and its entries for the same four dates match, with both early closes set at 6PM UTC (source: BloFin stock futures notice). Each date comes after November 1, which puts all of their UTC times on the winter schedule.

Day

Nasdaq's schedule

BloFin regular hours (UTC)

Thanksgiving, Thursday, November 26

No trading (source: Nasdaq holiday schedule)

None, closed all day (source: BloFin stock futures notice)

Friday after Thanksgiving, November 27

Shuts at 1PM ET (source: Nasdaq holiday schedule)

From 2.30PM until 6PM (source: BloFin stock futures notice)

Christmas Eve, Thursday, December 24

Shuts at 1PM ET (source: Nasdaq holiday schedule)

From 2.30PM until 6PM (source: BloFin stock futures notice)

Christmas, Friday, December 25

No trading (source: Nasdaq holiday schedule)

None, closed all day (source: BloFin stock futures notice)

A holiday next to a weekend turns it into a long break. Over Christmas, the window opens with the early close at 6PM UTC on Thursday, December 24, and lasts until Monday, December 28, at 2.30PM UTC, which is 92.5 hours. Thanksgiving breaks the week up instead. After Wednesday's 9PM UTC close on November 25, the only session left before Monday is a short Friday session of three and a half hours, 2.30PM to 6PM UTC.

Picture finishing work at 5PM UTC on Friday, November 27, and wanting to open a Microsoft trade. You would have an hour before the 6PM UTC early close. Wait until 6.15PM UTC, and an order to open a position meets a window in which BloFin may accept only closing orders until Monday, November 30, at 2.30PM UTC. Christmas Eve works the same way.

BloFin's table stops at the end of 2026, so the 2027 holidays will come in a new or updated notice. BloFin also keeps the right to change the notice at any time without warning (source: BloFin stock futures notice).


What you can do in a reduce-only window

During a reduce-only window you can still exit an MSFTUSDT position, fully or partly, with a market order, a limit order or a take-profit or stop-loss (TP/SL) on the position. What may be refused is any order that opens a position, adds to one or flips a long into a short, since each increases how much Microsoft's price can move your account.

BloFin's help center describes a reduce-only order as one that can only make an existing position smaller or end it. Turned on, the setting stops an order from making the position larger, and from opening a new position on the other side (source: BloFin reduce-only FAQ). You can apply it yourself at any hour with the Reduce-only box on the order panel. During the window, BloFin may apply it to every order on the contract.

Order on MSFTUSDT

Weekdays, 9.30AM to 4PM ET

Inside the window

Buy or sell that starts a position or makes it bigger

Works normally

May be refused, because it adds exposure (source: BloFin stock futures notice)

Buy or sell that ends a position or makes it smaller

Works normally

Allowed, though a fill is never certain (source: BloFin reduce-only FAQ)

Take-profit or stop-loss on a position you hold

Exits once its trigger price is hit

Allowed, since it only closes the position, as BloFin's stop-loss guide describes

Trigger order meant to start a new position

Places its order once its trigger price is hit

May be refused, since the order it places would add exposure (source: BloFin stock futures notice)

A take-profit or a stop-loss lets an exit fire overnight without you at the screen. You can add either one to all or part of a position from the Positions tab, as BloFin's stop-loss guide explains. Put it in place while the session is still open, so that if it turns out to be too tight, you still have time to change the size of the trade.

The tricky case is a closing order bigger than the position itself. BloFin's order form asks for the amount in MSFT. Each contract is 0.01 MSFT, so 1 MSFT is 100 contracts (source: BloFin MSFTUSDT listing notice). Imagine you are long 0.5 MSFT and you send a 0.8 MSFT sell with Reduce-only ticked. BloFin's own example uses bitcoin: with 1 BTC held long, a reduce-only sell of 1.5 BTC may close the 1 BTC but never creates a 0.5 BTC short (source: BloFin reduce-only FAQ). Applied to your trade, the 0.5 MSFT long is closed, and the extra 0.3 MSFT does not turn into a short.

That same FAQ also names an order bigger than the position as a reason for rejection, so an oversized exit may be cut to size or refused outright (source: BloFin reduce-only FAQ). The safest exit in the window matches your position exactly, and you check that size again whenever another exit fills.

One-way and hedge mode outside regular hours

Your position mode decides which orders count as opening a trade when the window applies. In one-way mode you hold one MSFTUSDT position, either long or short, and an order the other way makes it smaller. Hedge mode lets you carry a long and a short on MSFTUSDT at once, so an order on the opposite side starts a second position.

BloFin's help center explains the difference the same way. One-way mode allows a single direction on each contract, and hedge mode lets you keep a long and a short on one contract side by side (source: BloFin position mode FAQ).

Go back to the 0.5 MSFT long. In one-way mode, during the session, a 0.8 MSFT sell with the box left blank would close the long and leave a 0.3 MSFT short behind. If the window applies, only the 0.5 MSFT that unwinds the long passes the rule. In hedge mode, that 0.8 MSFT sell placed on the short side is a fresh short, whatever sits on the long side. So to cut risk overnight in hedge mode, close the long itself, because a short placed against it counts as new exposure.

Whichever mode you choose before 4PM ET is the one you hold overnight. BloFin blocks a change of mode while any position or order is open (source: BloFin position mode FAQ), so pick it while you have no open futures positions or orders.


MSFT premarket and after-hours trading and the perpetual

Microsoft shares keep trading on Nasdaq outside the main session, in an early session from 4AM ET and an evening session until 8PM ET. Neither counts as regular hours on BloFin. So while the shares are still changing hands in those sessions, the MSFT perpetual may be limited to orders that reduce what you hold.

Nasdaq lists its system hours as 4AM to 8PM ET, with the 9.30AM to 4PM ET market in the middle (source: Nasdaq holiday schedule). In UTC terms, the early session runs from 8AM to 1.30PM and the evening session from 8PM to 12AM during US daylight saving time. In standard time, each starts and ends an hour later. An after-hours price for Microsoft is just the price its shares fetch in that evening session, and company news released after the bell can move it sharply (source: Investor.gov extended-hours bulletin).

The perpetual keeps a price through those hours as well. BloFin builds its price index from quotes supplied by outside data vendors, and when outside data stops coming in, the index stays at the last value it calculated (source: BloFin MSFTUSDT listing notice). Nasdaq's evening session keeps quotes coming until 8PM ET, so the figure on your screen can keep changing after 4PM ET, at the same time as your choice of orders may shrink.

The SEC's bulletin on extended-hours trading sets out what changes once the main session ends. Fewer buyers and sellers compete on price, the spread between bid and ask grows wider, and news that companies release outside the session can send prices sharply up or down (source: Investor.gov extended-hours bulletin). BloFin's records for the Microsoft contract show the evening and weekend thinning, while the early session stays busy.

From September 28 to October 25, 2026, the perpetual traded 37.1 MSFT in an average hour between 2PM and 8PM UTC, the full hours of Nasdaq's main session. Weekday hours from 8AM to 1PM UTC, most of the early session, averaged 26.3 MSFT. The evening session averaged 8.5 MSFT an hour, weekday nights 7.2 and weekends 6.5 (source: BloFin MSFTUSDT price chart, 1-hour candles). By that measure, the evening after the close ran at 23% of the daytime pace and the weekend at 17.5%. That early-session pace, 71% of the daytime rate, starts at 4AM ET, 8AM UTC in that period, when Nasdaq's early session opens and fresh quotes reach the index.

Suppose Microsoft reveals an acquisition at 4.15PM ET on a Tuesday, and its shares leap in evening trading. A position you already hold rises or falls as the perpetual follows, and you can exit it, but at a price set by an evening market. On an average evening that market trades under a quarter of its daytime volume. On the October 28 results night, the first two hours after the close traded more than three times the afternoon's hourly average. With no position, your entry might only go through after the Wednesday open at 9.30AM ET.


Microsoft earnings release time and the reduce-only window

Microsoft puts out its quarterly results a few minutes after Nasdaq's 4PM ET close, so each report since the perpetual listed in April 2026 has arrived after its regular hours ended. Its fiscal 2027 first-quarter report, for July to September 2026, reached the SEC at 4.04PM ET on Wednesday, October 28, 17 hours 25 minutes before the next session.

The SEC's record of that filing, which carries the earnings release, shows it accepted at 4.04PM ET (source: SEC EDGAR, Microsoft results filing, October 28, 2026). Microsoft set its earnings call for 5.30PM ET that evening (source: Microsoft Q1 FY2027 results). In UTC, the filing came at 8.04PM, four minutes after BloFin's session closed, and the call started at 9.30PM.

Microsoft has kept to that timing all year. Its April filing was accepted at 4.03PM ET on April 29 (source: SEC EDGAR, Microsoft results filing, April 29, 2026), and its July filing at 4.04PM ET on July 29 (source: SEC EDGAR, Microsoft results filing, July 29, 2026). Its January filing, accepted at 4.04PM ET on January 28, came before the perpetual listed. In standard time that is 9.04PM UTC, four minutes after BloFin's standard-time 9PM UTC close (source: SEC EDGAR, Microsoft results filing, January 28, 2026).

Trading carried on after the bell. From 8PM UTC on October 28 to 1PM UTC on October 29, a span of 17 hours, 567.6 MSFT changed hands on the perpetual. The six full main-session hours earlier that afternoon had seen 181.8 MSFT, about a third as much (source: BloFin MSFTUSDT price chart, 1-hour candles). Every one of those overnight hours fell in the window, when BloFin may hold the contract to closing orders. BloFin's public record shows how much traded, not whether those orders opened or closed positions.

Microsoft's second-quarter fiscal 2027 results, for October to December 2026, normally arrive in late January, in standard time. If January 2027 looks like January 2026, BloFin's session ends at 9PM UTC a few minutes before the numbers appear, and from that point you may only trim or exit. How to size and guard a position for that night is the focus of the guide to trading Microsoft's results, and how to read the numbers themselves is the focus of the guide to reading Microsoft's earnings.


Planning MSFT perpetual trades around regular hours

The simplest plan for MSFT perpetual trades is to make every entry decision on a weekday between 9.30AM and 4PM ET, with your stop-loss and size settled before the bell. After that, you can still get out, but getting in or adding may be refused, and the contract trades far more thinly.

Every stock perpetual on BloFin runs on the same hours, so a routine you build for Microsoft carries over to the rest (source: BloFin stock futures notice). First, turn 9.30AM and 4PM ET into your local time for both halves of the year. Then put the daylight saving switches, November 1, 2026 and March 14, 2027, and BloFin's holiday dates on your calendar.

Before each close, choose whether a trade should stay open overnight, and place its stop-loss while there is still time to resize the trade if that stop looks too tight. The order screen, from margin mode and leverage to the exit orders, is walked through in the step-by-step guide to trading Microsoft. Size the trade for a night when adding or switching sides may be refused, and match each exit order to the position, so every close fits inside it.

Nasdaq is also preparing a 23-hour trading day, with a new 9PM to 4AM ET session that Nasdaq describes as subject to SEC approval (source: Nasdaq 23/5 trading hub).

Looking to trade the MSFTUSDT Perpetual within its regular hours? To get started, you'll need to first create a BloFin account, fund your account with cryptocurrency, and go to the MSFTUSDT Perpetual trading page.


Frequently asked questions

How long is the MSFT perpetual open for new trades each week?

In a normal week, MSFTUSDT has 32.5 regular hours, from 9.30AM to 4PM ET each weekday, when new trades work normally; outside them BloFin may accept only closing orders. Holiday weeks are shorter. In 2026, Thanksgiving week has 23 such hours, made of full sessions Monday to Wednesday, no session on Thanksgiving itself, and a shortened Friday that closes at 6PM UTC. Christmas week also has 23, with its short session on Thursday, December 24 (source: BloFin stock futures notice).

Is the MSFT perpetual open for new positions on Veterans Day?

Veterans Day is a normal trading day for the MSFT perpetual. In 2026 it falls on Wednesday, November 11, and it is a US federal holiday (source: OPM federal holidays), but Nasdaq's 2026 schedule does not list it as a closure (source: Nasdaq holiday schedule). BloFin's holiday rule covers days on which the US markets are shut, and its 2026 table lists nothing for November 11. New trades can be opened from 2.30PM to 9PM UTC (source: BloFin stock futures notice).

Why would BloFin reject a reduce-only order?

BloFin can refuse or cancel a reduce-only order even when your only aim is to exit. Its help center gives five causes. You hold no position to shrink, or the order is bigger than what you hold. Your position was already closed when the order ran, another exit got there first, or the order would add exposure (source: BloFin reduce-only FAQ). Acceptance does not mean a fill: a reduce-only limit order trades only if the price touches your limit and there is enough interest on the other side.

Does liquidation still happen in a reduce-only window?

A position can still be liquidated in the window, because reduce-only limits the orders you send, while liquidation is triggered by your margin. BloFin liquidates a position when the mark price reaches its liquidation price, the level at which the margin left in it stops covering the loss, as BloFin's guide to leverage and liquidation explains. The contract traded in every one of the 48 hours of the weekend of October 24 and 25, 2026 (source: BloFin MSFTUSDT price chart, 1-hour candles). Check your margin before Friday's close.

What time can you open MSFT perpetual positions after the weekend?

New MSFTUSDT trades work normally again from 9.30AM ET on Monday, when Nasdaq's main session begins. From Monday, November 2, 2026, that is 2.30PM UTC. It moves back to 1.30PM UTC once US daylight saving time restarts on Sunday, March 14, 2027, the second Sunday in March (source: NIST daylight saving time rules). Over the weekend you can still trim or close what you hold.


Researched and written by the BloFin Academy editorial team with AI-assisted drafting. All facts independently verified. Primary sources include BloFin's stock futures notice, its MSFTUSDT listing notice, its MSFTUSDT contract details and price chart, its help center articles on reduce-only orders and position modes, and its academy guides to stop-losses and to leverage and liquidation. They also include Nasdaq's holiday schedule and 23/5 trading hub, SEC EDGAR records of Microsoft's 2026 results filings, Microsoft's first-quarter fiscal 2027 results, Investor.gov's bulletin on extended-hours trading, NIST's daylight saving time rules and OPM's federal holiday list, current as of October 30, 2026.

Nothing in this article constitutes financial advice, and nothing in it is a recommendation to buy, sell or hold Microsoft in any form. Outside Nasdaq's main weekday session, and on weekends and US market holidays, BloFin may accept only orders that reduce an MSFTUSDT position, so you may be unable to open or add to a position when Microsoft's results or other news arrive. The contract keeps trading in those hours on much thinner volume, an exit may fill at a worse price or not at all, and a leveraged position can still be liquidated. Past performance does not indicate future results. Do your own research and consider your risk tolerance before you trade on BloFin.