Even the largest companies on the stock market have days when their shares jump or slide far more than usual, often after a results release. Buying shares with your own cash, you feel such a day as a change in value. Trading with borrowed money, you feel it several times over.
Most people who start trading with leverage ask first how much of it to use. A better first question is how much you are willing to lose if the trade goes wrong. That number, together with where you get out, decides the damage on a bad day, and leverage decides something narrower.
A perpetual futures contract lets you set each of those pieces on its own. You pick the size of the position, the price of your stop-loss and a leverage setting. If the margin behind the trade runs too thin, the exchange shuts the trade for you, and that is called liquidation. Knowing where that line sits before you trade is most of the job.
Microsoft is listed on BloFin as the MSFTUSDT Perpetual, a contract that follows Microsoft's share price and settles profit and loss in USDT, with leverage from 1x to 20x and a smallest order of 0.01 MSFT (source: BloFin MSFTUSDT contract information). The same three choices apply to it, and Microsoft's own price record shows what each one means.
What is position sizing on the MSFT perpetual?
Position sizing on the MSFT perpetual is choosing how many MSFT to trade so that a stop-loss, if hit, costs a set amount of your account. You divide the USDT you accept losing by how far your stop sits from your entry, and the answer is the size in MSFT.
Britannica Money sets out the same method in three steps for any market (source: Britannica Money). First, decide what you will risk on the trade. Next, work out the risk on each share or futures contract, then divide the first figure by the second. On the MSFT perpetual the unit is one MSFT, and BloFin splits it into contracts of 0.01 MSFT, so a position can be as small as one hundredth of a share's worth.
Written out, the rule for a long reads like this.
Size in MSFT = USDT you accept losing ÷ (entry price − stop price)
For a short the stop sits above the entry, so the distance is the stop price minus the entry price. The number of contracts is the size times 100, and the position's notional value, the USDT amount it controls, is the size times the entry price. Leverage appears nowhere in the rule.
The reason is simple. Leverage sets the margin you put up and the price where liquidation happens, while the size alone fixes the loss at your stop. BloFin's guide to position sizing in crypto applies the same rule to coins, and BloFin's guide to the MSFT perpetual covers the rest of the contract's terms.
How to calculate an MSFT perpetual position size
To size an MSFT perpetual long, take the USDT you accept losing and divide it by the price distance from entry to stop. With 20 USDT at risk, an entry at 521.91 USDT and a stop 4% lower, the answer is 0.95 MSFT, which is 95 contracts worth about 496 USDT.
The entry is Microsoft's closing price on Friday, October 30, 2026, $521.91 (source: Nasdaq, MSFT historical data). The fee is BloFin's standard taker rate of 0.06% for a market order, charged once to open and once to close (source: BloFin fee schedule). Each line follows from the one before it.
Step | Figure |
|---|---|
Futures account | 2,000 USDT |
Amount at risk, 1% of the account | 20 USDT |
Entry price | 521.91 USDT |
Stop-loss, 4% under the entry | 501.03 USDT |
Distance to the stop, per MSFT | 20.88 USDT |
Size, 20 ÷ 20.88, rounded down to 0.01 MSFT | 0.95 MSFT |
Contracts, at 0.01 MSFT each | 95 |
Notional value, 0.95 × 521.91 | 495.81 USDT |
Loss if the stop fills at 501.03 | 19.84 USDT |
Taker fees to open and close | 0.58 USDT |
Total loss at the stop | 20.42 USDT |
Rounding down to the nearest 0.01 MSFT keeps the price loss just under the 20 USDT you picked, and the two fees push the total slightly over it. BloFin charges the fee on the full notional value, so it is the same at 2x or 20x. BloFin's fee structure lists the lower maker rate for limit orders.
A short works the same way in mirror image: you sell at 521.91 USDT and place the stop 4% higher at 542.79 USDT. The distance is again 20.88 USDT, and the size is again 0.95 MSFT. The extra risks a short carries on report nights are covered in sizing a short on Microsoft.
On the MSFTUSDT Perpetual page, the order panel has an estimated Liq. Price field and a Calculator under the order buttons, so you can test a plan like this one first.
What share of your account to risk on a Microsoft trade
Many traders risk 1% or 2% of their trading capital on each trade, so that one loss never does lasting damage (source: Britannica Money). With 2,000 USDT in a futures account, that means 20 to 40 USDT on each trade. The share you choose matters most during a losing streak, because each loss comes off a smaller balance.
Losses rarely arrive one at a time. Each one is taken from the balance the last one left, so the damage compounds. Getting back to the starting balance then takes a larger percentage gain than the loss itself. Starting from 2,000 USDT, a run of losing trades at a fixed share of the account works out like this.
Share of the account risked per trade | First loss | Balance after 5 losses | Balance after 10 losses |
|---|---|---|---|
1% | 20 USDT | 1,901.98 USDT | 1,808.76 USDT |
2% | 40 USDT | 1,807.84 USDT | 1,634.15 USDT |
5% | 100 USDT | 1,547.56 USDT | 1,197.47 USDT |
At 1%, ten losing trades in a row leave you about 9.6% down, and a gain of about 10.6% takes the balance back to where it started. At 5% the same streak takes 40.1% of the account, and the remaining balance then has to grow by 67.0% just to get back to 2,000 USDT.
Britannica also suggests risking a smaller share, or tightening stops, when an asset turns very volatile, and it names companies about to report earnings as one example (source: Britannica Money). Microsoft reports results four times a year, so that advice comes back every quarter.
Microsoft's daily range and where to place a stop
Place a stop outside Microsoft's normal daily range, or ordinary moves will close the trade for no reason. Over the 250 sessions to October 30, 2026, Microsoft's median true range was about 2.3% of the previous close, and the median gap from one close to the next was about 1.1% (source: Nasdaq, MSFT historical data).
True range is the standard measure of how far a price traveled in one session. ChartSchool defines it as the largest of three gaps: the day's high minus its low, the high minus the previous close, and the low minus the previous close (source: StockCharts ChartSchool). Averaged over 14 sessions it becomes the average true range, or ATR, and traders often set stops at a multiple of it. ChartSchool's Chandelier Exit, for example, hangs a long position's stop three ATRs under the highest high of the last 22 sessions (source: StockCharts ChartSchool, Chandelier Exit).
Microsoft's recent sessions have been a little calmer than its year. Across the last 60 sessions to October 30, the median true range was about 2.0%, and the 14-session average stood near 2.2% (source: Nasdaq, MSFT historical data). A stop 1% from the entry sits well inside a normal day, while the 4% stop in the worked plan sits nearly twice the median range away. A wider stop simply means a smaller size, since the formula keeps the loss at the amount you chose.
The days that break positions are rare and large. Microsoft reported results on January 28, 2026 (source: Microsoft, Q2 FY2026 results) and on July 29 (source: Microsoft, Q4 FY2026 results). In the sessions that followed, its shares closed 9.99% lower on January 29 and 15.51% higher on July 30, and at their worst points they were 12.58% down and 17.45% up from the previous close (source: Nasdaq, MSFT historical data).
The perpetual reacts before the shares do. After the July report, the MSFTUSDT Perpetual's last price rose 15.2% in the 24 hours from the Nasdaq close (source: BloFin MSFTUSDT price chart, 1-hour candles). Microsoft reported its July to September 2026 results on October 28, after the Nasdaq close, with its results call at 5.30PM ET, 9.30PM UTC (source: Microsoft, Q1 FY2027 results). Within the first hour, the perpetual's mark price rose from 532.41 USDT to as high as 565.41 USDT (source: BloFin MSFTUSDT price chart, 1-hour candles). Yet the shares' October 29 session closed only 0.2% lower (source: Nasdaq, MSFT historical data). How positions at each leverage level came through those nights is laid out in the guide to trading Microsoft around earnings.
A stop is also no promise of the price you set. When the stop price is reached, the order becomes a market order, and in a fast market the price it fills at can differ a lot from the stop price (source: Investor.gov, stop orders). How Microsoft's swings add up over months, and how they compare with other large stocks, is covered in the explainer on Microsoft stock volatility.
What leverage changes on an MSFT position
Once the size and stop are set, leverage changes two things: the margin you post, and the price at which BloFin liquidates the position. It leaves the loss at your stop alone. Higher leverage locks up less margin but moves liquidation closer, and past a point the liquidation price sits nearer than your stop.
Margin on an isolated position is the notional value divided by the leverage (source: BloFin margin mechanism FAQ). For the 0.95 MSFT plan worth 495.81 USDT, BloFin's liquidation formula puts the margin and the liquidation price for each setting at these levels from the 521.91 USDT entry (source: BloFin liquidation price FAQ). The inputs are the 2.50% maintenance margin rate (source: BloFin MSFTUSDT position tiers) and the 0.06% taker fee (source: BloFin fee schedule).
Leverage on 0.95 MSFT | Margin | Margin as % of 2,000 USDT | Liquidation price | Liquidation against the 501.03 stop |
|---|---|---|---|---|
3x | 165.27 USDT | 8.3% | 357.08 USDT | 143.95 USDT further away (source: BloFin liquidation price FAQ) |
5x | 99.16 USDT | 5.0% | 428.50 USDT | 72.53 USDT further away (source: BloFin liquidation price FAQ) |
10x | 49.58 USDT | 2.5% | 482.06 USDT | 18.97 USDT further away (source: BloFin liquidation price FAQ) |
20x | 24.79 USDT | 1.2% | 508.84 USDT | 7.81 USDT closer (source: BloFin liquidation price FAQ) |
At 20x the liquidation price of 508.84 USDT comes before the 501.03 stop, so a slide of about 2.5% closes the trade and the stop never gets its turn. At 10x the liquidation price sits 18.97 USDT past the stop, about 3.6% of the entry price, and one sharp gap through the stop could still cover that. From 5x down, the liquidation price is far past the stop, and the extra margin mostly sits idle as a cushion.
So the comparison gives two losses, and leverage moves only one. The planned loss is the cost of the stop, about 20 USDT here whatever the setting. The worst case is a jump straight past the stop to liquidation. For an isolated position, BloFin counts the margin you put in as the most you can lose (source: BloFin margin mechanism FAQ). Lower leverage makes that worst case bigger but pushes liquidation further off, and higher leverage does the reverse.
MSFT perpetual liquidation price at each leverage level
From an entry at 521.91 USDT, an isolated MSFT perpetual long hits liquidation once the price drops by roughly the following: at 20x, 2.5%; at 10x, 7.6%; at 5x, 17.9%; at 3x, 31.6%. For a short, the matching rises are 2.4%, 7.3%, 17.0% and 30.0%, a little closer each time (source: BloFin liquidation price FAQ).
The formula BloFin publishes covers an isolated position margined in USDT. For a long, take the margin, subtract size × entry price, then divide by size × (maintenance margin rate + fee rate − 1) (source: BloFin liquidation price FAQ). For a short, add size × entry price to the margin, then divide by size × (1 + both rates).
Maintenance margin is the smallest amount of margin a position must hold to stay open. BloFin sets it at 2.50% of the position's value on MSFTUSDT positions no larger than 200 MSFT (source: BloFin MSFTUSDT position tiers). The fee rate used here is the 0.06% standard taker fee (source: BloFin fee schedule), the same rate BloFin's own worked example puts into this formula (source: BloFin forced liquidation rules). With both inputs, the formula gives these prices.
Leverage | Margin per MSFT | Long liquidation price | Fall that liquidates a long | Short liquidation price | Rise that liquidates a short |
|---|---|---|---|---|---|
1x | 521.91 USDT | 0 USDT | a fall to zero | 1,017.77 USDT | 95.0% (source: BloFin liquidation price FAQ) |
2x | 260.96 USDT | 267.81 USDT | 48.7% | 763.32 USDT | 46.3% (source: BloFin liquidation price FAQ) |
3x | 173.97 USDT | 357.08 USDT | 31.6% | 678.51 USDT | 30.0% |
5x | 104.38 USDT | 428.50 USDT | 17.9% | 610.66 USDT | 17.0% |
10x | 52.19 USDT | 482.06 USDT | 7.6% | 559.77 USDT | 7.3% |
20x | 26.10 USDT | 508.84 USDT | 2.5% | 534.33 USDT | 2.4% |
Inside the first tier, the percentage distance depends only on the leverage, so it holds for 0.01 MSFT as well as for 150 MSFT. Even a 1x short has a liquidation price. A share price has no ceiling, and a rise of about 95% would use up the whole margin. BloFin liquidates on the mark price, and the comparison of mark and last price covers how far the two can drift apart in a fast market.
How often Microsoft's daily range reached each liquidation distance
In the 250 sessions to October 30, 2026, Microsoft's low fell 2.5% or more under the previous close on 34 days, and its high rose 2.4% or more above it on 38 days. Only the two report sessions, January 29 and July 30, reached the 10x distances, and only July 30 reached the 5x short's (source: Nasdaq, MSFT historical data).
Each count is the number of sessions in which Microsoft's intraday low or high moved at least that far from the previous day's close (source: Nasdaq, MSFT historical data). Those are regular-session highs and lows, so the perpetual's path overnight and at weekends can add moves the daily record never shows.
Leverage | Sessions with a fall that would liquidate a long, of 250 | Sessions with a rise that would liquidate a short, of 250 |
|---|---|---|
2x | 0 | 0 |
3x | 0 | 0 |
5x | 0 | 1 (July 30, 2026) |
10x | 1 (January 29, 2026) | 1 (July 30, 2026) |
20x | 34 | 38 |
At 20x, the distance to liquidation is about the size of a typical Microsoft day, so a move that large came about one session in seven. Put the other way, a 20x position leaves no room for Microsoft's ordinary range. The 5x short's distance was reached only on July 30, the biggest report session of the year, and the 3x distance not at all. The same trade-off on crypto contracts is set out in BloFin's leverage and liquidation guide.
Isolated or cross margin on the MSFT perpetual
Isolated margin caps what one MSFT position can lose at the margin you assign to it, so a liquidation leaves the rest of your futures balance untouched. Cross margin puts every balance in the futures account behind the trade, along with the profit or loss of every other position there (source: BloFin margin mechanism FAQ).
That difference matters more for a Microsoft position than for most crypto trades, because many people who trade it also hold crypto positions in the same account. Under cross mode, profit or loss elsewhere in the account shifts the Microsoft position's liquidation price (source: BloFin forced liquidation rules). A crypto position that drops hard on a Saturday can pull margin away from a Microsoft trade even when the MSFT index hardly moves.
Cross mode can survive dips that would liquidate an isolated position, since it draws on more money. BloFin's margin guide adds the other side: in a major market event, all the funds in a cross account can be lost (source: BloFin margin mechanism FAQ). For an account with two or more positions, its liquidation formula gives an estimate only for reference, which makes a cross liquidation price harder to plan around (source: BloFin liquidation price FAQ).
For sizing, the effect is simple. Your stop sets the planned loss in either mode, since it closes the same size at the same level. What changes is the worst case: in isolated mode it is the position's margin, and in cross mode it is the whole futures balance. The introduction to margin trading walks through how each mode is set up.
Position tiers on larger MSFT positions
BloFin raises the maintenance margin as an MSFT position grows, so a larger position is liquidated sooner at the same leverage. The rate is 2.50% up to 200 MSFT, 3.33% from 200.01 to 1,000 MSFT and 5.00% from 1,000.01 to 4,000 MSFT, with maximum leverage falling from 20x to 15x and then 10x (source: BloFin MSFTUSDT position tiers).
At the 521.91 USDT entry, the first tier ends at a position worth about 104,382 USDT, so most individual trades sit well inside it. The tier counts more than your open position. BloFin bases the highest leverage you can use on your position plus your open orders plus the order you are placing (source: BloFin MSFTUSDT position tiers). A large limit order still waiting to fill already counts toward the tier.
Moving up a tier shrinks the room before liquidation, both at a fixed leverage and at the tier's own cap. These distances for a long come from the same formula and the 0.06% fee at 521.91 USDT.
Position size | Maintenance margin rate | Highest leverage | Fall that liquidates a long at 10x | Fall that liquidates a long at the highest leverage |
|---|---|---|---|---|
Up to 200 MSFT | 2.50% | 20x | 7.6% | 2.5% |
200.01 to 1,000 MSFT | 3.33% | 15x | 6.8% | 3.4% |
1,000.01 to 4,000 MSFT | 5.00% | 10x | 5.2% | 5.2% |
4,000.01 to 10,000 MSFT | 10.00% | 5x | not available | 11.1% (source: BloFin MSFTUSDT position tiers) |
Two limits on the contract page also bear on large sizes: a single market order can carry at most 200 MSFT, and a limit order at most 2,000 MSFT. BloFin also says it may change these settings as markets change, with no separate notice (source: BloFin MSFTUSDT contract information). The contract's trading volume and the cost of a big market order are in BloFin's guide to the MSFT perpetual. Check the Position Tiers tab again before you add to a big position.
Checking an MSFT perpetual order before you place it
Before an MSFT perpetual order, check five things. First come the USDT you accept losing, the stop distance against Microsoft's daily range, and the size in MSFT and contracts. The last two are the liquidation price at your leverage and the calendar until your planned exit.
Risk: the loss at the stop, fees included, is the share of the account you set for one trade.
Stop: the stop sits outside a normal Microsoft day, which has run at about 2% to 2.3% of the price over the past year.
Size: divide the risk by the stop distance and round down to the nearest 0.01 MSFT.
Liquidation: the liquidation price in the order panel lies past the stop, and you could afford to lose the margin if a gap jumps the stop.
Calendar: a results release, a weekend or a US market holiday before your exit means a gap can land while trading may be limited to reduce-only orders.
If the risk, stop or calendar check fails, cut the size and leave the stop where it belongs. If the liquidation price sits inside the stop, a smaller size will not move it, because inside the first tier that distance depends on the leverage setting alone.
The calendar check matters because of the contract's hours. Outside the regular weekday session, and through weekends and holidays, BloFin may let stock futures take reduce-only orders only (source: BloFin stock futures notice). In US standard time, Nasdaq's regular session opens at 9.30AM ET and closes at 4PM ET, which in UTC is 2.30PM to 9PM. The full schedule is in the guide to MSFT perpetual trading hours, and the study of overnight and weekend gaps shows how far the price has moved while Nasdaq was shut.
Say you run the check on the 0.95 MSFT long. The stop costs about 20.42 USDT with fees, and the worst case at 5x is the 99.16 USDT of margin, with liquidation about 17.9% away. At 20x the check fails at the liquidation line, because 508.84 USDT comes before the 501.03 stop. Placing the order, with the stop attached, is set out step by step in the walkthrough for trading Microsoft on BloFin, and BloFin's stop-loss guide covers setting a stop that triggers on the mark price.
Looking to trade the MSFTUSDT Perpetual with a size you have set in advance? To get started, you'll need to first create a BloFin account, fund your account with cryptocurrency, and go to the MSFTUSDT Perpetual trading page.
Frequently asked questions
How is sizing the MSFT perpetual different from buying Microsoft shares?
When you buy Microsoft shares with cash, the cash caps the size: 2,000 USD buys three whole shares at $521.91, and a fall cannot close the holding for you. On the MSFTUSDT Perpetual, leverage lets that 2,000 USDT support a far bigger position, so your risk rule has to set the size. Borrowing to buy shares works differently again: in a brokerage margin account you can lose more than you put in, and the firm may sell your shares without asking you (source: Investor.gov, margin accounts). Holding the perpetual does not make you an owner of Microsoft shares, so sizing it comes down to price risk alone (source: BloFin stock futures notice).
Does funding change the liquidation price of an MSFT position?
Funding does move it. On an isolated position, BloFin's estimated liquidation price shifts each time a funding payment settles, whether you pay or receive it (source: BloFin forced liquidation rules). On the MSFTUSDT Perpetual those payments normally settle every 8 hours (source: BloFin MSFTUSDT contract information), so a position held for weeks drifts a little from the liquidation price you planned. The rates and their history are in the explainer on the MSFT perpetual funding rate.
Can you add margin to an MSFT position to move its liquidation price?
Putting more margin into an isolated position pushes its estimated liquidation price further off, and taking margin out brings it nearer (source: BloFin forced liquidation rules). That only works before the line is reached. Once the mark price touches the liquidation price, you can no longer add or reduce margin or place orders, and BloFin's liquidation system takes control of the position at the bankruptcy price.
What is the smallest MSFT perpetual position you can open?
The smallest order on the MSFTUSDT Perpetual is 0.01 MSFT, one contract (source: BloFin MSFTUSDT contract information). At the October 30 close of $521.91, that is about 5.22 USDT of exposure, needing about 0.26 USDT of margin at 20x or 1.04 USDT at 5x. Steps of 0.01 MSFT let a small account size a trade closely, so a 500 USDT account risking 1% can still match its stop to its risk.
What is the margin ratio on an MSFT perpetual position?
The margin ratio shows how close a position is to liquidation. For an isolated position, BloFin takes the margin plus any open profit or loss and divides it by the sum of the maintenance margin and the transaction fee (source: BloFin liquidation price FAQ). At 100% or below, BloFin may partly reduce or liquidate the position (source: BloFin forced liquidation rules). For the 0.95 MSFT long opened at 5x, it starts near 781%: 99.16 USDT of margin against about 12.69 USDT of maintenance margin and fee.
Researched and written by the BloFin Academy editorial team with AI-assisted drafting. All facts independently verified. Primary sources include BloFin's MSFTUSDT contract information and position tiers pages, its fee schedule, its stock futures notice of April 21, 2026, its MSFTUSDT price chart, and its help center articles on the margin mechanism, liquidation price calculation and forced liquidation rules. They also include Microsoft's results releases of January 28, July 29 and October 28, 2026, Nasdaq's MSFT historical data, Britannica Money's guide to position size, StockCharts ChartSchool on average true range and the Chandelier Exit, and Investor.gov's bulletins on stop orders and margin accounts, current as of November 2, 2026.
Nothing in this article constitutes financial advice, and nothing in it is a recommendation to buy, sell or hold Microsoft in any form, or to use any leverage setting. At 20x, a move of about 2.5% against an MSFTUSDT Perpetual position can liquidate it, and Microsoft's share price moved that far within a session on 34 of its 250 sessions to October 30, 2026 for a long. A stop can fill past its price in a gap, so the margin behind an isolated position is the realistic worst case, and a cross-margin position can take the whole futures balance with it. Past performance does not indicate future results. Do your own research and consider your risk tolerance before you trade on BloFin.
